You discovered our blog Remote Flashes. Please Remember to bookmark this page Flash Shoe Adapter.
![]() Flash Hot Shoe PC Sync Cord Socket Adapter for Camera US $1.00
|
Flash Shoe Adapter
Accessory Shoe to Universal Shoe Adapter 4 Canon Mini - 4CH Zoom H4N w/ CamCaddie Hardware
NEX-VG10 Is The World’s First Camcorder With Interchangeable Lenses
Sony has simply unveiled the World's first interchangeable lens HD digital camcorder, the NEX-VG10 . This unit shares numerous its specs with its Alpha brethren, the NEX-3 and NEX-5. These include Sony's APS-C sized (23.4x15.6mm) Exmor CMOS image sensor, BIONZ picture processing unit, and their new E-mount system. Expect full 1920x1080 HD video at 24 megabits per second, which equates to Blu-ray image quality. The NEX-VG10 will ship with an E-mount 18-200mm lens with 11x optical zoom and optical image stabilization. Further E-mount lenses can be out there at launch in addition to an adapter for A-mount lenses that additionally work with Sony Alpha DSLR cameras.
On the sound aspect, the NEX-VG10 will sport a Quad Capsule Spatial Array Microphone that data stereo sound from four distinct areas, minimizing background noise in favor of audio in front of the camera. A regular external audio input - a characteristic not found on many Sony Handycam camcorders - may even be included. Image high quality for the VG10 will seemingly show extremely similar to that of the NEX-5, for the reason that VG10 uses the exact same lenses, picture sensor, and film processor -- however there are a few necessary variations in terms of video and nonetheless picture file codecs.
Beyond the physique design, perhaps the most important difference in the Sony NEX-VG10 that makes it a better video tool than the NEX-collection compacts is its sound recording capabilities. Where the only-lens direct view cameras used a constructed-in twin pinhole stereo microphone, or optionally a small, proprietary external stereo microphone, the VG10 presents improvements in each inside and external sound recording.
The Sony VG10 uses three of the four microphones when reconstructing the sound for each stereo channel-- each front mics, plus the rear mic on the related side for the left or right channel. Sony is claiming the NEX-VG10's microphone array design affords a 2x enhance in directivity when in comparison with that of the prevailing HDR-CX550V camcorder. Quantity of the headphone or inner speaker may be adjusted manually in 15 steps, however report levels can't be altered. Permitting for an exterior microphone to be mounted on the camcorder without disrupting nonetheless picture flash capabilities, a versatile compartment door on the highest of the mic / EVF / deal with bar conceals both a hot shoe for exterior flash strobes, and a cold shoe on which to connect a microphone mount.
A couple of other differences between the camcorder and single-lens direct view NEX models make the VG10 better suited to video capture. The place the NEX-5 is proscribed to a most clip length of 29 minutes and 50 seconds, the VG10 has no such restrict, and can document for so long as there's obtainable card space / battery energy. For additional information, please go to where to buy Handycam NEX-VG10 .
If you are looking for a different item here are a list of related products on Remote Flashes, please check out the following:
Frequently Asked Questions...
PC set up for a Nikon D40x?
im currently trying to figure out a list of parts i need to set up a PC external flash set up i no i need a hot shoe to PC sync adapter but i dont know whether i should try to get two speed lights with PC sync ports or just get PC sync to hot shoe adapters? what do you suggest? and any idea where to buy these adapters in Melbourne?
so how would you set up a lighting system using strobes that will be the cheapest as possible?
Answer:
Unless you buy a couple of Pocket Wizards, you will have to buy the hot shoe adapter and a splitter. Be sure the hot shoe adapter is inductive and will not send the high trigger voltage to your camera ... it will fry it.
Nikon DSLR's are equipped to handle 12 v trigger voltages. Canon can only handle 6v trigger v.
Here is a link to an old database that may help you.
http://www.botzilla.com/photo/strobeVolts.html





















































































